|
序号 |
标准代号 |
发布时间 |
国际标准分类号（ICS） |
英文名称 |
中文名称 |
技 术
委员会TC/SC |
|
1 |
IEC/TRF 60335-2-29 |
17/7/ 2009
|
|
This Test Report Form applies to IEC 60335-2-29:2002 (Fourth edition) + A1:2004 in conjunction with IEC 60335-1:2001 (Fourth edition) + A1:2004 + A2:2006 |
该试验报告格式适用于IEC 60335-2-29:2002 (4版) + A1:2004，与 IEC 60335-1:2001 (4版) + A1:2004 + A2:2006联用 |
61 |
|
|
IEC/TRF 60335-2-37 |
17/7/ 2009
|
|
This Test Report Form applies to IEC 60335-2-37 :2002 (Fifth Edition) )+A1:2008 in conjunction with IEC 60335-1:2001 (Fourth Edition) corr.+ A1:2004 + A2:2006 |
该试验报告格式适用于IEC 60335-2-37 :2002 (5版) )+A1:2008，与 IEC 60335-1:2001 (4版) 勘误表+ A1:2004 + A2:2006联用 |
61 |
|
|
IEC/TRF 60335-2-38 |
17/7/ 2009
|
|
This Test Report Form applies to IEC 60335 2-38 :2002 (Fifth Edition) + A1:2008 in conjunction with IEC 60335-1:2001 (Fourth Edition) corr.+ A1:2004 +A2:2006 |
该试验报告格式适用于IEC 60335 2-38 :2002 (5版) + A1:2008，与 IEC 60335-1:2001 (4版) 勘误表+ A1:2004 +A2: 2006联用 |
61 |
|
|
IEC/TRF 60335-2-47 |
17/7/ 2009
|
|
This Test Report Form applies to IEC 60335-2-47 :2002 (Fourth Edition)+ A1:2008 in conjunction with IEC 60335-1:2001 (Fourth Edition) corr.+ A1:2004 + A2:2006
|
该试验报告格式适用于IEC 60335-2-47 :2002 (4版)+ A1:2008 ，与 IEC 60335-1:2001 (4版) 勘误表.+ A1:2004 + A2:2006联用 |
61 |
|
|
IEC/TRF 60335-2-50 |
17/7/ 2009
|
|
This Test Report Form applies to IEC 60335 2-50 :2002 (Fourth Edition) + A1 :2007 in conjunction with IEC 60335-1:2001 (Fourth Edition) corr.+ A1:2004 + A2:2006 |
该试验报告格式适用于IEC 60335 2-50 :2002 (4版) + A1 :2007 ，与 IEC 60335-1:2001 (4版) 勘误表.+ A1:2004 + A2:2006联用 |
61 |
|
|
IEC/TRF 61535 |
17/7/ 2009 |
|
This Test Report Form applies to IEC 61535 :2009 (First Edition) |
该试验报告格式适用于IEC 61535 :2009 (1版) |
|
|
|
IEC 60965 |
16/7/ 2009
|
27.120.20 |
Nuclear power plants - Control rooms - Supplementary control points for reactor shutdown without access to the main control room |
核电站——控制室——在无权使用主控制室情况下反应堆停工时用的辅助控制点 |
45A |
|
|
IEC 61020-1 |
16/7/ 2009
|
31.220.20 |
Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
电器和电子设备用机电开关——第1部分：总要求 |
23J |
|
|
IEC 60079-29-1 Corr.i1 |
16/7/ 2009
|
29.260.20 |
Intrepretation sheet 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
翻译标准1——爆炸空气——第29-1部分：煤气探测仪——可燃气体用探测器性能要求 |
|
|
|
IEC 62149-2 |
16/7/ 2009
|
33.180.20 |
Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices |
光纤有源元件和器件——性能标准——第2部分 ：850nm离散垂直空穴表面发射激光器件 |
91 |
|
|
IEC 61935-1 |
16/7/ 2009
|
33.120.10 |
Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards |
对称和同轴信息技术电缆——第1部分：按照ISO /IEC 11801和有关标准规定安装的对称电缆 |
46 |
|
|
IEC 62343-6-2 |
14/7/ 2009 |
33.180. 43.060.50 |
Dynamic modules - Part 6-2: Software and hardware interfaces - Survey results |
动态模块——第6-2部分：软件和硬件接口——测量结果 |
86C |
|
|
IEC 61300-2-12 |
14/7/ 2009
|
33.180.20 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact |
光学纤维互连器件和无源元件——基本试验和测量程序——第2-12部分：试验——冲击试验 |
86B |
|
|
IEC 62384-am1 |
14/7/ 2009
|
29.140.99; 31.080.99 |
Amendment 1 - DC or AC supplied electronic control gear for LED modules - Performance requirements |
修改1——LED模块的DC或AC供电控制传动装置——性能要求 |
34C |
|
|
IEC 60092-370 |
14/7/ 2009
|
29.060.20; 47.020.60 |
Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables |
船上电装——第370部分：关于包括射频电缆在内的通信和数据传送电缆的选用指南 |
18A |
|
|
IEC 61188-7 Corr.1 |
14/7/ 2009
|
31.180 |
Corrigendum 1 - Printed boards and printed board assemblies - Design and use - Part 7: Electronic component zero orientation for CAD library construction |
勘误表1——印制板好印制板组装件——设计和使用——第7部分：CAD图书馆结构用的电子元器件零方向 |
91 |
|
|
IEC 62074-1 |
14/7/ 2009
|
33.180.01; 33.180.20 |
Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification |
光学纤维互连器件和无源元件——光学纤维WDM器件——第1部分：总要求 |
86B |
|
|
IEC 61280-2-3 |
14/7/ 2009
|
33.180.01 |
Fibre optic communication subsystem test procedures - Part 2-3: Digital systems - Jitter and wander measurements |
光纤通信子系统试验程序——第2-3部分：数字系统——抖动和徘徊试验方法 |
86C |
|
|
ISO/IEC 18026 |
13/7/ 2009
|
35.140. |
Information technology - Spatial Reference Model (SRM) |
信息技术——空间基准模式(SRM) |
JTC 1 |
网友评论：（只显示最新10条。评论内容只代表网友观点，与本站立场无关！）
